This Campaign 3 insert is designed to be compatible with Spirit Island® and the Branch and Claw® expansion. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in two layers. There are four trays for storing large cards, two vertically at the side of the box, and two for horizontal storage of cards . There is one more card tray for the small cards. The cities and towns go in one long tray, and the explorers in a separate smaller tray. The second long tray is for the blight, fear markers and the dahan pieces. The other two trays are for the player pieces and the beasts, wilds, disease, and strife tokens form the expansion. This game boards need to be placed in the box in the following sequence. First go the spirit panels on top of the lowest layer of trays on the left. This is followed by the adversary and scenario panel cards, and then the invader board. The invader board extension goes next. Then the expansion rules followed by the island boards, and lastly the game rulebook goes on top. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
This Campaign 3 insert is designed to be compatible with Terra Mystica®, and the Fire and Ice® expansion. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers. There is one for each of the nine factions, and they have a divider to separate the larger buildings from the smaller pieces.The favor tiles are arranged with a separate slot for each of the four cults to aid game play. The terrain tiles are stored vertically and at an angle so they can be quickly sorted through to find the needed type. The boards and rules go on top of the trays acting as a lid, allowing the game to be stored vertically. First goes the game rules. This is followed by the main game board, and the faction boards and the cult board. Lastly go the turn order board and the cloth bag. The insert is designed to hold 4 faction boards and the cult board. Adding a fifth faction board will cause the box lid to lift by 2 mm. This allows the game to be packed ready for a game away from home, and carried safely and organised. The remaining faction boards and the game board variant, together with the rules in languages not needed, should be stored in the Fire and Ice box. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Note: Insert designed for games with external box dimensions of 29.5 x 29.5 x 7.1 cm. Also note that this is the second version of insert for Terraforming Mars.This insert is designed to be compatible with Terraforming Mars®, and includes space for the Hellas & Elysium®, Venus Next®, Prelude® and Colonies® expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and player boards act as a lid on top of the trays.There is space for all cards to be sleeved.With the top layer removed there is the second layer of trays underneath. There is also a third square tray for the ocean tiles in the top right corner underneath the tray shown with the white cubes. Of the two large vertical trays, one is for project cards, and one is for the Prelude cards and the Colony tiles. The two narrow vertical trays are for the reference cards and the corporations. The three horizontal trays are for project cards. There is space for all cards to be sleeved with quality sleeves. All the trays can be used during the game to organise the components and make access by all players easy. The game boards and rule books go on top of the central trays and act as a lid keeping the game pieces in the trays. The lid closes flush, and the box can be stored vertically. When placing them inside, first go the two game boards, followed by the Venus and Colonies side boards. Next go the player boards, and then the expansion rule books. Lastly the game rules go on top, filling the box.This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Note: Insert designed for games with external box dimensions of 31.4 x 22.4 x 12.1 cm.Insert compatible with Barrage® including The Leeghwater Project® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times.The insert is arranged in up to three layers as shown, with the player pieces on the left and other components on the right hand side.Each player gets a two trays of their own to organise the various pieces for their faction. The coin tray has extra space to hold the metal coins, and the excavator / concrete mixer trays have spare space for the add-on sets if you have them.The insert includes one large tray for vertical storage of the contract, external work, starting setup, and automa tiles. The tray slots have adiditoinal space to also hold the contract tiles from the 5th player expansion. The extra boards and wheel from the expansion will slightly lift the lid of the box though if these are also added.When packing the box, first place the main game board on top of the insert trays, followed by the management board. Next place the five company boards and the narrow board extensions. Then add the construction wheels, private building tiles, and executive office tiles as shown, with the patent office board on top of the wheels. Next goes the extra management board from the expansion, and on top the energy track and player aid tiles. Lastly place the three rulebooks on top, fully filling the box and allowing for vertical storage of the game.This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Insert compatible with Clank!®, and the Sunken Treasures®, The Mummy’s Curse®, Gold and Silk® and Acquisitions Incorporated® expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards act as a lid on top of the trays. The insert is arranged in layers and also has space for the soon to be released Temple of the Ape Lords® expansion components, but not for the expansion's board. Note also the cloth bag rolled up on the left. There are six trays for storing the large cards. Two of these are for horizontal storage of the dungeon deck. The other four are for vertical storage of the expansion dungeon decks, the reserve cards and the Acquisitions Incorporated® starter decks. Each of these four trays also have a slot in the front for the base game starter decks. All cards can be sleeved with quality sleeves. There are two trays for the Acquisitions Incorporated® miniatures, and two trays for the coins. the last tray shown is for the pyramid die, and the curse and web tokens. Once the insert is packed into the box you need to next place the four game boards on top (note there is not space in the insert for the fifth board from Temple of the Ape Lords®). This is followed by the rule books as shown. Lastly you need to place the Acquisitions Incorporated player boards and two of the markets on top of everything else. This will fill the box to the top and the game can be stored vertically. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
This Campaign 3 insert is designed to be compatible with Dinosaur Island Extreme Edition®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. This same insert also works with the Totally Liquid Extreme Edition® expansion. The insert is in two layers just in one corner, you can see in the top right the bottom layer tray. Also note here how the dino recipe tiles are stacked in the other top corner, and that the player and game boards are on top of each other in the bottom of the box. The tray for the dinos was made as large as possible to make it easy to store either the regular triceratops pieces, or the full KS selection of species. There is space for all cards to be sleeved. Each player has their own separate tray for their pieces. here is a tray for storing all visitor meeples (prior to them being placed in the bag), and a tray for storing the VIP visitors and the dice. There is a large tray for vertical storage of the lab upgrades, paddocks, and attraction tiles. Then there are two separate trays for storing the metal coins, also vertically for ease of access. One tray can be placed on either side of the table. The two coin trays can be assembled in one of two ways: either for vertical storage of the metal coins or as a simple box for storing the card coins from the game. Note that if the metal coins are used there is not then another storage space for the card ones, and these would need to be kept elsewhere.For this insert the game boards go on the bottom and the insert trays on top, as noted above. Once all trays are placed inside, next goes the rulebook. After this should go the visitor bag, with the knots from the string tucked into the spaces as shown. Lastly the fast pass wrist band is placed over the string. The box is then fully loaded, and the lid will close flush and the game can be stored vertically.Note: the insert does have space for the "create your own" attraction and lab upgrade cards, but it does NOT have space for the slang tokens and three "create your own" dino recipe tiles. These would need to be stored separately in the Totally Liquid box. The KS pogs do not have a slot in the inserts. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Note: Insert designed for game with external box dimensions of 29.5 x 29.5 x 7.0 cm.Official full colour insert compatible with Bitoku®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The trays are arranged in up to two layers as shown. All the trays feature a full colour print, inside and out. There is space for all cards to be sleeved with quality sleeves. the inside tray colours of the player trays match each of the four player factions.Each player receives their own player tray and the long resource tray can be placed next to the board in easy reach of all players. The outside print of the resource tray has been designed to interact with the board edge. As most of the player pieces are added to the player board at the start of the game, you can stand the tray next to your player board to even further advertise your allegiance. All the trays have colour icons added to the tray bottom to make it easy to know what goes where when clearing the game away. When packing the box, first place the main game board on top of the trays, together with the three larger board insert pieces and the tengu attitude tile as shown. Next place the player boards on top. Lastly place the rule books and player aids on top of the boards. Note that in order to have no lid lift you will have room for just one language set of the rules and player aids, so the second language set would need to be stored elsewhere. The single language rule books fully fill the box without any lid lift and allows for vertical storage of the game.FS-BTKU is an officially licensed insert product made in partnership with Devir Games®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Note: Insert designed for games with external box dimensions of 25.4 x 29.2 x 7.6 cm.Insert compatible with the new rectangular boxes for Living Card Games® such as Arkham Horror: The Card Game® The Revised Core Set, The Lord of the Rings: The Card Game® The Revised Core Set, as well as their expansions with the same box size. The insert is sized for sleeved cards, and comes in two variants with either space for more game components such as bags and dials, or with additional card storage. There is also a stack of three token trays. One tray, which can be used be used on either side of the box end, has no middle divider to give space for larger tiles and mini sized cards. The main large card tray has two bases in the corners to add rigidity and to make assembly easier. The smaller end trays all have the same sized base and can be interchanged as needed. When assembling the insert you need to decide whether you need more space for tokens/dials/bags or to add space for additional cards. In this way we have made the insert more flexible for a variety of game boxes. Variant 1 has space for 800 sleeved cards in total, while Variant 2 has space for 900 sleeved cards. When packing the box, simply add the rule and learn to play books on top of the insert trays. This fully fills the box and allows for vertical storage of the game. The FS-LCG3 insert can also be used in expansions with the same box size. See below images of the insert in the Edge of the Earth Campaign Expansion® box. As the character mini cards and chaos bag will be in the main game box, we recommend using here the second assembly variant to provide more space for cards. The main card tray has dips at one end to provide room for the ring binder on the campaign guide book.FS-LCG3 is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.
Note: Insert designed for game with external box dimensions of 29.5 x 22.6 x 7.6 cm.Insert compatible with Sagrada®, including 5-6 Player Expansion®, The Great Facades – Passion®, The Great Facades – Life®, and various promo expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times.The trays are arranged in up to three layers, and the game boards are stacked in the top left corner. All component types are split by type organising all the game components and there is space for all cards to be sleeved. Note that there is one spare tray for additional future releases.The insert includes a filler tray which is used to hold the stack of game boards and other trays in place. When packing the box, first place game boards in a stack in the top left corner, together with the small expansion rule books. The dice bag is folded and placed on top of the stack as shown. Lastly place the main rule book on top of everything. This fully fills the box and allows for vertical storage of the game. FS-SGRDA is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.